Innovative Model Railroad Control System

User Tools

Site Tools

Trace:
wio:wiopico-io16lnet-en

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
wio:wiopico-io16lnet-en [2026/01/07 14:09] – [8 Data bytes] rjversluiswio:wiopico-io16lnet-en [2026/01/09 12:11] (current) – [GCA1001] rjversluis
Line 15: Line 15:
   * NEO Pixel   * NEO Pixel
   * I2C   * I2C
 +  * Stepper motor
 +  * LED & NEO Pixel Signals
  
  \\  \\
-=====GCA PCB==== +=====GCA1001==== 
-{{:gca:wio_loconet_01_v3_3d.png?300}} {{:gca:pict_01.png?300}} +GCA provides a PCB/Kit for WIOpicoLNet:\\ 
-  * **[[:wio_loconet_01|WIOpicoLNet_01]]**\\+{{:gca:gca1001_3d.png?0x200|}} {{:gca:pict_01.png?0x200}} 
 +  * **[[:GCA1001-en|GCA1001]]**\\
  
  \\  \\
Line 29: Line 32:
  \\  \\
 =====WIO LNet setup===== =====WIO LNet setup=====
-If the WIOpicoLNet should be used as WiFi bridge the WiFi credentials must be set.\\ +If the WIOpicoLNet should be used as WiFi bridge the **[[:arduino:wio-setup-en#wlan|WLAN credentials]]** must be set.\\ 
-All other settings are under Configuretion.\\+All other settings are under **[[:arduino:wio-setup-en#configuration|Configuration]]**.\\
 {{:wio:wiolnet-maintenance-en.png?600}}\\ {{:wio:wiolnet-maintenance-en.png?600}}\\
 ====Options==== ====Options====
Line 95: Line 98:
 If the status pixel is used, pixel 1, the LED address is internally increased by one.\\ If the status pixel is used, pixel 1, the LED address is internally increased by one.\\
  
 +
 + \\
 +====Signals====
 +LED signals can be defined in the same way as standard WIO.\\
  
  \\  \\
Line 115: Line 122:
 ===== Tunnel packet ===== ===== Tunnel packet =====
 To be able to use various WIO functions a tunnel packet is defined.\\ To be able to use various WIO functions a tunnel packet is defined.\\
 +
 +==== 4 Data bytes ====
 +^ OPC ^ Length ^ Destination ^  Operation  ^  Data  ^^^^^  CRC  ^ 
 +|  0xEC  |  10  |  Node-ID  |  RASCII OPC  |  High bits 1  |  data 0  |  data 1  |  data 2  |  data 3  |  Checksum  | \\
 +
  
 ==== 8 Data bytes ==== ==== 8 Data bytes ====
 ^ OPC ^ Length ^ Destination ^  Operation  ^  Data  ^^^^^^^^^^  CRC  ^  ^ OPC ^ Length ^ Destination ^  Operation  ^  Data  ^^^^^^^^^^  CRC  ^ 
-|  0xEC  |  15  |  Module#  |  RASCII command  |  High bits 1  |  data 0  |  data 1  |  data 2  |  data 3  |  High bits 2  |  data 4  |  data 5  |  data 6  |  data 7  |  Checksum  | \\+|  0xEC  |  15  |  Node-ID  |  RASCII OPC  |  High bits 1  |  data 0  |  data 1  |  data 2  |  data 3  |  High bits 2  |  data 4  |  data 5  |  data 6  |  data 7  |  Checksum  | \\
  
  
 ==== 12 Data bytes ==== ==== 12 Data bytes ====
 ^ OPC ^ Length ^ Destination ^  Operation  ^  Data  ^^^^^^^^^^^^^^^  CRC  ^  ^ OPC ^ Length ^ Destination ^  Operation  ^  Data  ^^^^^^^^^^^^^^^  CRC  ^ 
-|  0xEC  |  20  |  Module#  |  RASCII command  |  High bits 1  |  data 0  |  data 1  |  data 2  |  data 3  |  High bits 2  |  data 4  |  data 5  |  data 6  |  data 7  |  High bits 3  |  data 8  |  data 9  |  data 10  |  data 11  |  Checksum  | \\+|  0xEC  |  20  |  Node-ID  |  RASCII OPC  |  High bits 1  |  data 0  |  data 1  |  data 2  |  data 3  |  High bits 2  |  data 4  |  data 5  |  data 6  |  data 7  |  High bits 3  |  data 8  |  data 9  |  data 10  |  data 11  |  Checksum  | \\
  
  
Line 136: Line 148:
 | 5 | nop | nop | nop |  | 5 | nop | nop | nop | 
 | 6 | Event flag | nop | nop |  | 6 | Event flag | nop | nop | 
-| 7 |  -  |  -  | +| 7 |  -  |  -  |  -  | 
  \\  \\
  
wio/wiopico-io16lnet-en.1767791374.txt.gz · Last modified: 2026/01/07 14:09 by rjversluis